Methods to sew on badges by hand or by machine

When you wish to brighten up a piece of clothing, accessory, luggage piece or perhaps hats you can easily sew on badges to achieve the new look easily. Badges or patches when placed strategically can immediately alter the look of a garment or accessory and take it from boring to spunky within just a few minutes. If you have children and they keep earning badges of merit you would want to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy when you know the way to do it.

To start off this approach to sewing on a badge, start by placing the badge in the place for which you want it to be. Now secure the badge well with a few pins so that it stays in place and doesn’t shift when you’re sewing it on. Now if you are putting the patch over a garment, you have to fix the patch after which you can try the garment on to ensure that the patch or the badge looks suitable in the place. If your patch requires a little readjustment it can be done at this stage easily.

Now thread the needle being sure that the thread that you are using isn’t very long. Keep the thread on a length of approximately 18inches for quick maneuvering. In case your thread is simply too long then you might get bothered by knots. When you have the thread ready create a knot at the end of the thread. You can actually thread a needle manually by holding the non knotted end between your forefinger and thumb after which passing it via the eye of the needle. You may also consider the help of a needle threader if you find threading a needle in this way difficult.

Pass the needle in the badge and also the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you commenced stitching keeping this distance from the last stitch constantly. Continue stitching surrounding the entire perimeter of the badge until you have completely finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread through a single stitch. Pull the thread firmly to secure the knot and then cut off any excess thread that is left. Lastly remove the extra safety pins that you were using to secure the patch in position.

You can also sew on badges by using a sewing machine if you don’t want to do the same yourself. Select a thread that matched the color of the patch after which tread your machine. You may as well decide on a contrasting color with regards to the look that you’d like to present your badge. Once this is achieved you have to start sewing you badge. Utilize the top of the badge as your starting place and sew all along the edge of your badge using the regular stitch mode ending in your starting position. Once done, cut the extra thread that connects the badge to the machine and your garment is ready for usage together with the badge.